rolling pass

Production Practice of The Reforming Rough Rolling Pass and Hot Charging and Hot Conveying of Continuous Casting Billets

热送热装连铸方坯和粗轧孔型改造的线材生产实践

The method changes the traditional backward means of judging the quality of template by visual inspection, effectively advances the accuracy of rolling pass, therefore increases the rolling product quality.

它改变了传统的人工肉眼判定样板质量的落后方法，有效地提高了轧钢孔型的制造精度，从而提高了轧制产品的质量。

Anonymous FTP: Yes And also short pass, overhead pass and the excellent rolling pass.

支持匿名FTP上传还是短传，头上传。最精彩的是你的滚地传球。

Simulation of Square Billet Rolling in Box Pass by Explicit Dynamics Finite Element Method

箱型孔轧制方坯的显式动力学有限元模拟

Optimization of Rolling Pass Based on Dynamic Programming Method

基于动态规划的孔型优化系统研究

The elongation control system of cold rolling skin pass mill was described; the speed feedforward control and feedback control in the control system were detailed explicated.

描述了应用于唐钢冷轧薄板厂平整机组的延伸率控制系统，对该延伸率控制系统中的速度前馈控制和延伸率反馈控制做了重点阐述。

Overhead pass and the excellent rolling pass.

头上传.最精彩的是你的滚地传球.

Pass Design and Application of Thin Diameter Tantalum Wire Rolling Based on Numerical Simulation

基于数值模拟的细径钽丝轧制孔型设计与应用

The microstructure evolution of mild carbon steel ( Q235) has been investigated by analyzing the original austenite microstructure after each rolling pass in CSP.

在CSP机组上，通过普通碳素钢（Q235）的轧卡试验研究了该钢在连轧过程中的组织演变过程。

Sidepiece deformation spreading is dominant during the first flat rolling pass. Influence of slip spreading enhances, while effect of sidepiece deformation spreading reduces during the later passes.

在第一道次轧制中，宽展以侧边自由变形宽展为主，而在后续轧制道次中，滑动宽展的影响增大，侧边自由变形的宽展影响减小。

Be more rolling pass!

多传地滚球!

The compression strength increases with the increasing of rolling pass.

抗压强度随着轧制道次的增加而增加。

Detection of Rolling Pass Template with Computer-Plot

轧钢孔型样板采用计算机绘图检测

The tests of pass machining of high speed steel roll for round steel, ribbed bar and its splitting rolling pass were carried out to resolve the difficult machining problem of high speed steel roll.

针对高速钢轧辊孔型加工困难问题，唐山联强冶金轧辊有限公司对圆钢、带肋钢筋及其切分孔型的孔型加工进行了试验。

The paper introduces a new method of precise detection on rolling pass template with the help of digital camera photographing and computer software.

介绍了一种借助数码相机拍摄和计算机软件对轧钢孔型样板进行精确检验的新方法。

Effect of Homogenization Temperature and Hot Rolling Pass on Morphology of Compound in 3104 Sheet

均匀化温度、热轧道次对3104制罐板化合物形貌的影响

The result shows that the alloy has good cold processing performance, employs reduction 50% and annealing temperature 800 ℃× 1 h for the cold rolling pass, and all quality and characteristic indications of the cold rolled products meet the requirement of technical standard.

研究结果显示，该合金冷加工性能优良，冷轧道次采用50%的变形量和800℃，1h的退火制度，轧制产品的质量和各项性能指标均满足技术标准要求。

Calculation of opening of cross rolling pass

斜轧孔型开度值计算

Design of ellipse-circle pass for collective-drive tandem rolling unit

集体传动连轧机组椭圆&圆孔型的设计

Calculation and Application of Rolling Force in Pass for Anode Aluminium Foil

高压阳极箔成品道次轧制力计算及应用

Computer Aided Rolling Pass Design for Creeper Tread Steel teaching auxiliary

履带钢计算机辅助孔型设计系统的开发教师助手，教学辅助人员

The System of the Roll Configuration Design of Steel Tube Three Roll Cold Cross Rolling and Roll Pass Cad

钢管三辊冷斜轧的轧辊辊型设计

Using Pro-E software to build a three-dimensional model to DEFORM-3D finite element analysis software for the platform, the production of drill steel drill blanks to roll from the cogging to rolling 20 pass process was simulated.

利用Pro-E软件建立了三维模型，以DEFORM-3D有限元分析软件为平台，对钻孔法生产钎钢从开坯到精轧二十个道次轧制过程进行了数值模拟。

Based on this idea, a new designing method of single pass and continuous rolling pass have been inquired.

用这种思想探讨了单个孔型和连轧孔型的设计方法。

It is a new method to establish optimal rolling schedule and pass design parameters.

对制定轧制负荷最优的变形制度及孔型参数提供了新的方法。

And also short pass, overhead pass and the excellent rolling pass.

还是短传, 头上传.最精彩的是你的滚地传球.

X-H Rolling Pass Design Technology

X-H轧制孔型设计技术

Brief Introduction of Continuous Rolling Process and Pass System in Continuous Rolling Bar Plant

连轧棒材厂连轧工艺及孔型系统简介

The relative problems such as designing continuous rolling pass system and optimizing mathematical model operation are solved after practice and utilization rate of the mandrel is increased.

实施后，解决了连轧孔型系统设计、优化数模运算等相关问题，提高了芯棒利用率。

The simulation analysis of the product quality influenced by the pass profile of rod and bar tandem rolling

棒材连轧孔型对产品质量影响的模拟分析